Water Treatment

Summary:

 KD-type sodium hypochlorite generator is an equipment that can produce the disinfectant by electrolyzing the brine of diluting
industrial salt or seawater. Sodium hypochlorite is strong oxidant and disinfector, which can be used todisinfecting the water .It has good bactericidal effect, safe and convenient, with a shorter contacting time.

NaCl+H2O→NaClO+H2↑  

 This equipment is widely used in the sewage treatment works in the hospital, the circulating water treatment works at swimming pools and natatorium, intermediate water treatment works, feeding chlorine for industrial circulating water, and the treatment of industrial waste water with cyanogens. Besides, it can be used to disinfect drinking water, vegetables, fruit, wasting room, ward, blanch the paper pulp and  hemp, and disinfect drinking water and living place for the fowl, etc.

Introduction

1: feature

A: Its manufactured according to the GB12176-90 standard, all the targets have reached the A level of national standard.

B: Adopting PLC program control and sequencing batch principle of operation, preparing 10g/l sodium hypochlorite disinfectant batch after batch till the finished products is filled with the box.

     The automatic control steps are as follow:

     1) Check the liquid level of finished product case

     2) If it is not full, switch on the salt water pump and fill the electrolysis bath with salt water.

     3) Then, switch off the pump, and start a constant current and voltage electrolysis for 60-90 minutes.

     4) When time's over, switch on the power valve of the downing liquid, the finished disinfectant flow into the case.

     5) Then, the positive and negative poles would be rotate automatic.

     6) Repeat all the steps for 1-5 till the finished product case is full, then, the equipment would stop automatically.

C: It is generated by the non-membrane electrolysis of the common salt water, the request of the turbidity is not strict.

D: High activity of titanium anode, long useful life, and electrolysis by batch, save salt and the electricity

E: Full-automation control, it just need feeding salt by artificial for 3 to 10 days.

F: Pipeline and valve, pipe fitting all adopt the U-PVC engineering plastics, with good corrosion resistance and tightness.

G: The whole set of equipment is with high full- automatic and convenient to use.

H: The fitting of equipment is with high quality of standardization and good interchangeability.

I: In the electrolysis of each batch, the positive and negative poles would be